30 mm x 55 mm x 32 mm INA GE 30 FW-2RS plain bearings

Da max.:75.4 mm; a:23.3 mm; Calculation factor fHC:1; Mass bearing:0.26 kg; Ball diameter Dw:7.938 mm; r3,4 min.:0.6 mm; Preload class B GB:400 N; da max.:59.7 mm; Attainable speed for grease lubrication:23000 r/min; Calculation factor f2A:1;

Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:10600 N; B:19.1 mm; d:10.000 mm; Basic Static Radial Load Rating Co:6100 N; Grease Speed Rating n1:15000 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:0.64 mm; D:35.0000 mm; Oil Speed Rating n2:20000 rpm;

Bearing:YAR 204-012-2RF/VE49; H:64 mm; J min.:91 mm; A5:26.3 mm; Basic static load rating C0:6.55 kN; End cover:ECW 204; s1:18.3 mm; B:31 mm; Housing:SYWK 504 Y; Recommended diameter for attachment bolts, mm G:10 mm;

Basic Dynamic Radial Load Rating C:449000 N; D:280.0000 mm; B:116.00 mm; Oil Speed Rating n2:2000 rpm; Grease Speed Rating n1:1500 rpm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:610000 N; d:130.000 mm;

with cylindrical bore:2 400 min-1; Pu:289 kN; Grease:330 kN; d:70 mm; B:51 mm; with tapered bore:3 000 min-1; Dynamic (Cr):3 mm; D:150 mm; Static (Cor):5.5 mm; rs (min):2.1 mm;

Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; Tolerance shaft:e7; Mass bushing:0.04 kg; B:20 mm; a:3 mm; Permissible sliding velocity v max.:0.5 m/s; D:25 mm; Tolerance housing:H7;

d1:198.438 mm; B1:179.959 mm; Threads per inch:8; Hydraulic nut:HMVC 40E; d3 max.:250.165 mm; Sleeve:S 140x7.13/16; Lock nut:AN 40; Lock washer:W 40; d:200 mm; Mass adapter sleeve assembly:16 kg;

RG:1 NPT; Initial grease fill:2749.95 g; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 23; PosiTrac Plus contact element:2 x B10724-167; P150°:145 kN; J1:133.35 mm; N1:41.275 mm; P90°:254 kN; L:831.85 mm;

Calculation factor e:0.28; Basic dynamic load rating C:96.5 kN; Pa:15 kN; P0°:160 kN; ba min.:34 mm; Calculation factor Y1:2.4; End cover:ECY 208; J:170 mm; H:114 mm; P180°:110 kN;

Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; B1:8 mm; Mass bushing:0.6 kg; Coefficient of friction µ max.:0.1; D:75 mm; Permissible sliding velocity v min.:0.25 m/s; D1:85 mm; B:60 mm;

Basic Dynamic Radial Load Rating C:33200 N; d:45.000 mm; B:19.00 mm; D:85.0000 mm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:9000 rpm; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:21600 N; Oil Speed Rating Open/Shielded n2:9000 rpm;

Grease Speed Rating Open/Shielded n1:4000 rpm; Accessories:Two Seals; Sealed Speed Rating n3:2500 rpm; Basic Static Radial Load Rating Co:44000 N; Oil Speed Rating Open/Shielded n2:4800 rpm; Fillet Radius ra:1.00 mm; d:110.000 mm; D:150.0000 mm; B:20.00 mm; Basic Dynamic Radial Load Rating C:43600 N

RG:3/8 NPT; Bearing limiting speed:4800 r/min; J max.:333.375 mm; Initial grease fill:365.71 g; da:88.9 mm; End plug (suffix Y):EPR 12; P180°:48.9 kN; Cap bolt recommended tightening torque:203.4 N·m; Mass pillow block:28.1 kg; P60°:119 kN;

R1:79.375 mm; Bearing limiting speed:2800 r/min; ba:63.5 mm; P60°:189 kN; P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; Stabilizing ring:SR-0-22; Pa:26.7 kN; J min.:371.475 mm; A2:206.375 mm;